Beyerdynamic MCW-D 200, Руководство по эксплуатации

Страница: 52 / 112

52
3.2 MCW-D 2071 and 2073 Microphone Units with Display
The MCW-D 2071 delegate and MCW-D 2073 chairman microphone units have been developed for interpreting applications
and operate on the same principle as the other MCW-D microphone units. In addition to the other MCW-D microphone units,
however, they are fitted with three more buttons and a display. Using these buttons you can adjust the (language) channel, head-
phone level, the volume of the system and the remaining operating time can be seen.
The display is illuminated. This illumination is activated when the button is pressed and will go out after around 10 seconds.
(1) Multi-function socket (connection of external charger or
DC-supply)
(2) Operating control LED
(3) Charging contacts for MCW-D 10, LE-D 10 charger or
DC connection of DC-powered microphone units
(4) Mini stereo jack socket (3.5 mm) for the connection of recorders or
headphones (e.g. DT 1)
(1) (2) (3) (4)
Rear view
(5) Gooseneck microphone with illuminated ring
(6) Loudspeaker
(7) LED to indicate the function (green / red)
(8) Microphone button
(11) LC-Display
(12) Buttons for adjustments
(6)
(5)
(7)
(8)
(11)
(12)
Top view MCW-D 2071 delegate microphone unit
3.2.1 Controls and Indicators
Important:
• Remove the transportation protection (a piece of cardboard) from the charging compartment of each microphone unit
inside the MCW-D 10 charging and transport case before use. When the unit is transported again, replace the transportation
protection.
• The charging contacts (3) of the microphone units can cause damages, injuries or fire damages if they come into
contact with conductive materials such as jewelry, keys or chains. This can lead to a closed circuit and heat up the material.
• To avoid an unwanted closed circuit treat the charging contacts (3) with care, especially when the microphone units are
carried in a bag or other containers together with metallic objects.
• To avoid overstretching and premature wear and tear, always adjust the gooseneck microphone via the
lower flexible part of the microphone and never the microphone head or rigid tube. The gooseneck can only
be bent 90° at maximum.