Beyerdynamic MCW-D 200, Руководство по эксплуатации

Страница: 50 / 112

50
3. Delegate and Chairman Microphone Units
• At the factory each microphone unit is programmed with a different identity number so that the MCW-D 200 control unit can
control them individually.
• This number, which cannot be changed, is printed on the bottom of each microphone unit.
• When you order more microphone units later, please inform the supplier of the configuration of the control unit and the identity
numbers of the microphone units.
3.1 MCW-D 2011/2013 and MCW-D 2021/2023 Microphone Units
The MCW-D 2011/2013 and MCW-D 2021/2023 are suitable for monolingual discussions without voting.
(1) Multi-function socket (connection of external charger or
DC-supply)
(2) Operating control LED
(3) Charging contacts for MCW-D 10, LE-D 10 charger or
DC connection of DC-powered microphone units
(4) Mini stereo jack socket (3.5 mm) for the connection of recorders or
headphones (e.g. DT 1)
(5) Gooseneck microphone with illuminated ring
(6) Loudspeaker (MCW-D 2021 only!)
(7) LED to indicate the function (green / red)
(8) Microphone button
(6)
(5)
(7)
(8)
Top view MCW-D 2011/2021 delegate microphone unit
(1) (2) (3) (4)
Rear view
3.1.1 Controls and Indicators
Important:
• Remove the transportation protection (a piece of cardboard) from the charging compartment of each microphone unit
inside the MCW-D 10 charging and transport case before use. When the unit is transported again, replace the transportation
protection.
• The charging contacts (3) of the microphone units can cause damages, injuries or fire damages if they come into
contact with conductive materials such as jewelry, keys or chains. This can lead to a closed circuit and heat up the material.
• To avoid an unwanted closed circuit treat the charging contacts with care, especially when the microphone units are
carried in a bag or other containers together with metallic objects.
• To avoid overstretching and premature wear and tear, always adjust the gooseneck microphone via the
lower flexible part of the microphone and never the microphone head or rigid tube. The gooseneck can only
be bent 90° at maximum.