background image

MCS-D 3643 – Connections

23

english

���

2 x 5-pin Phoenix connector

You can connect individual buttons to the 2 x 5-pin Phoenix connector. 

Ch+ and Ch- :

to adjust the language channel of a connected headphone 

Vol+ and Vol- : 

to adjust the volume of a connected headphone

Prev : 

to allow the previous speaker of a request-to-speak list to speak, if the conference system is operated in

the request-to-speak mode

Next : 

to allow the next speaker of a request-to-speak list to speak, if the conference system is operated in the

request-to-speak mode

Clear :

to turn on the chairman microphone unit while turning off the switched on or registered delegate 

microphone units. Depending on the operating mode the requests to speak are cleared or not. 

Prior : 

for prior turning on of a switched off chairman microphone unit, while muting the delegate microphone

units temporarily 

GND:

ground

���

7-pin Phoenix connector

You can connect e.g. the MPR 211 microphone or a microphone button and external indicators to the 7-pin
Phoenix connector.

Mic Button :

to connect a microphone button

LED-: 

to connect an external LED, which displays an active microphone

+24 V :

voltage source for the external LED

GND:

ground

Audio + and Audio - : 

balanced microphone signal

Shield:

shield

���

5-pin XLR connector

You can connect a microphone with LED ring such as Classis GM 314 E to the 5-pin XLR connector. 

���

Mini jack (3.5 mm)

You can use the line input (mini stereo jack 3.5 mm) to connect e.g. a laptop.

���

Input Select Switch

To select the input source (microphone or line).

Important:

Select with the switch Mic-Phantom, Mic-Electret or Line 

before

you connect the appropriate 

microphone or the laptop to the MCS-D 3643 system unit.

Mic-Phantom: 

48 V Phantom power e.g. for a connected MPR 211 microphone

Mic-Electret: 

AB-powering e.g. for Classis GM 314 E / GM 315 E

Line: 

Line level e.g. for laptop

���

5-pin Phoenix connector

You can connect a headphone or loudspeaker to the 5-pin Phoenix connector of the MCS-D 3643 system unit.

LS + and LS -:

connectors for a loudspeaker

HP-L, HP-R and Com : 

connectors for a headphone

Содержание MCS-D 3643


















Отзывы: