6
Brightness setting:
By pressing
the button. By pressing the
button, the fireplace is brighter and has more brightness. You
can reduce the brightness by 4 levels by pressing the
button.
Setting the heat output:
Press the
button once to select the low heating level. Press twice in succession to set the high
temperature. If you press the button again, the fireplace heating will stop and the fan will start 10 seconds after the heating is stopped.
Temperature control is possible on the remote control.
CONTROL BY REMOTE
DAY
SET UP
HOUR
MIN
WEEK/TIME
Remove the foil from the battery compartment of the remote control, and the remote control will
be ready for use.
RELEASE
PUL
L
OPEN
PUSH
CR2025
RELEASE
CR2025
Use the same buttons you found on the fireplace control. The remote control is using infrared technology, so point the remote control at
the fireplace you want to control. The infrared signal works from a maximum distance of 4-5 meters, make sure that no objects or people
get between you and the fireplace during the control.
Timer set up ont he remote:
After pressing the
WEEK/TIME
button, press the
SET UP
button to chose ON/OFF. This allows you to
change the timing of switching on or off at a given time.
Please do not set the timer for a period when you cannot monitor its
operation! After commissioning, check that all timers are off.
Temperature adjustment:
You can also set the temperature on the remote. Press the heating button (once or twice depending on the
desired power level), then adjust the temperature in the range of 15 to 30 degrees Celsius using the “+” and “-” buttons.
Overheating protection
: If the device overheats for some reason, it will turn off automatically. Remove any objects that have caused
overheating. To safely restart the fireplace, turn off the power for 15 minutes. Once the appliance has cooled down, it will switch on again.
Cleaning:
Always switch off, unplug and let the appliance cool down before cleaning. Use a dry cloth or vacuum cleaner to remove dust
The housing should only be wiped with a slightly damp cloth, making sure that no moisture enters the device! Do not use chemicals or
alcohol during cleaning!
Storing:
Store in a cool, dry place. Do not throw away the product box.
You can use it to store the device when not in use. Caution Only put the appliance back in its box if it has cooled down properly.
MALFUNCTIONS
Reason
Solution
Does not work / fan does not rotate.
Check the safety shutdown mode. (The unit has overheated or
shut down for some reason.
The following icon is displayed on the device
stopped:
The device is working properly. It’s been sensed that the air in the
room had cooled by 5-10 degrees. For economical use, make sure
that one of the doors and windows is not open.
The flame effect does not work.
Check the LEDs, restart the device
