4
INSTALLATION INSTRUCTIONS
Install the appliance at least 30 cm high on the wall, so that the distance between the ceiling and the appliance is at least 100 cm. We
recommend placing the lower part of the appliance at a height of 60 cm from the ground to ensure the best visual experience in the
fireplace flag fire.
A safe installation requires at least two people!
INSTALLATION
The included mounting accessories provide mounting on brick, concrete, silicate walls. When mounted on a plasterboard
wall, it can only be installed on a horizontal support structurePrior to installation, make sure that the wall section
has the correct load capacity and can provide the power supply for the device in the given location. When attaching
to drywall, use a special drywall dowel, not the one included in the package! When fixing to a wooden surface, it is not
necessary to pre-drill the holes and use dowels for the screws!
1. Remove the two screws that secure the bracket to the back of the device,
and then remove the bracket from the device.
2. Using a spirit level and a pencil, draw a horizontal line on the wall at the
desired height.
3. Place the bracket part on the wall and mark the location of the mounting
holes on the line on the wall
4. Use a drill to drill the holes securing the
bracket. Use an 8 mm drill bit for drilling. The
depth of the holes must be at least 26 mm deep.
Do not use a smaller mounting size!
x
4
x
4
110
110
110
5. Insert the supplied dowels into the holes until they are
aligned with the plane of the wall.
6. Secure the bracket to the wall with the 4 screws!
