5
Avoid the use of extension cords or splitters, as they are a source of danger during operation. Use only splash-
proof extension cables with a cross-section of at least 3 x 1 mm
2
. Always unplug the appliance when not in
use. Maintenance work must only be carried out with the mains plug removed.
Operation:
The device may only be operated when fully assembled with the factory accessories! If any part
is damaged, it must be replaced before use. The device is designed for residential use! During operation,
be careful not to overexert the device, as this will damage the motor and shorten its life. Do not use the
appliance for more than 10 minutes at a time! The accessories may only be replaced after the power supply
has been completely disconnected (disconnected from the mains plug).
CAUTION!
General advices:
Do not use the appliance if you have previously dropped or smashed it and it is visibly
damaged! It is strictly forbidden to use, modify or disable safety devices as intended!
Operation:
Always operate and store the device as described! Always check the integrity of the device, cable,
connector and accessories. In the event of damage, do not use the device! When using and maintaining the
device, make sure to maintain its balance and stable position!
ATTENTION!
Operation:
Use the appliance only at freezing temperatures above 0 ° C to avoid condensation and electric
shock. Never leave the appliance unattended when it is connected to the mains! Protect the device from
moisture and water! Do not store the device outdoors in high temperatures.
The device is used exclusively for whipping and mixing food and kneading pasta. The manufacturer and
distributor shall not be liable for any damage resulting from improper use or improper handling.
Replacement of accessory mixer arms
1. Before replacing, make sure that the device is not connected to the mains. Accidental switching on of the
device can result in serious injuries!
2. Press the speed control button on the top of the appliance downwards to release the lock that clamps
the mixer arms.
3. Carefully pull the mixer arms out of the appliance.
4. Insert the desired arms until you hear a clicking sound.
5. Before use, make sure that the mixers are properly connected to the appliance.
6. Place the mixer arms in the mixing bowl and turn on the device at the desired speed. We recommend that
you start mixing at a low speed to avoid food splashing.
Speed Settings
OFF – The device is switched off.
1-7 – Where 1 is the lowest gear and 7 is the highest gear.
