FH07B Series Installation Instructions Issue 3.0
INS00306 Page 9 of 24
Contents of Package
The product should reach you in perfect working order. If the unit is damaged in any way or
if the supplied kit is incomplete, please contact Bewator Ltd. immediately.
1 x FH07B Series Camera Housing, including Sunshield, fitted with optional accessories.
1 x General Packing Kit comprising:
4 x M5 x 16 Hex Socket Button Head Screw.
4 x M5 Nylon Washer.
3 x M5 x 60mm M5 Hex Head Special - Rear Cap Removal Screw.
2 x M6 x 70 Cap Head - Rear Cap Fitting Guide Screw.
4 x Cable Gland (Hawke Cable Gland Type 501/421).
1 x Installation Instructions INS00306.
Optional
1 x Optional Accessories Packing Kit comprising:
Either 1 x Installation Instructions INS00054 (complete with ‘D’ Type Telemetry Module)
– 10 function Receiver [RX210].
Or
1 x Installation Instructions INS00093 (complete with ‘D’ Type Telemetry Module)
– 17 function Receiver [RX217].
Before Starting Installation
1.
Ensure that the contents of the package (see above) are correct.
2.
Read all of these Installation Instructions.
3.
Ensure that the correct tools are used when installing – see below.
4.
Ensure that the complete assembly is tested in the workshop, prior to installation on
site.
After Installation
1.
Save these Installation Instructions for future use.
2.
Save the 3 off Rear Cap Removal Screws and the 2 off Rear Cap Fitting Guide
Screws for future use.
