FH07B Series Installation Instructions Issue 3.0
INS00306 Page 20 of 24
Maintenance
The following guidelines for maintenance should be observed:
1 Month After Installation
All external fastenings and cables should be thoroughly checked for tightness, security and
wear.
6 Monthly Checks
All external fastenings and cables should be thoroughly checked for tightness, security and
wear.
Perform checks to ensure that cables are not fouling on any obstruction.
Check cables for signs of wear. Replace as necessary.
If fitted, the wiper arm and blade should be checked for wear or corrosion. Replace as
necessary.
2 Yearly Checks
If fitted, the wiper arm and blade should be replaced.
5 Yearly Checks
If the unit is exposed to very severe weather conditions or other harsh environments, the two
‘O’ ring rubber weather seals, on the Rear Cap Assembly and on the Front Cap Assembly,
should be replaced. The unit should be returned to Bewator Ltd. for ‘O’ ring replacement.
