Bewator Bewacard BC610, Инструкция по установке и эксплуатации

Страница: 14 / 28

14 BC610 Installation and User manual
Log on a series of cards
Using this function you can quickly log on a contiguous series
of cards.
1 Set the card reader to programming mode.
2 Press A04.
!""
3 Enter the card number of the first card in the series.
4 Enter the card number of the last card in the series. The
red LED flashes as the cards are logged on.
5 Press B to leave programming mode.
Cancel card (with card)
Using this function a card can be cancelled (with the card) so
that it cannot be used in the card reader.
1 Set the card reader to programming mode.
2 Press A14.
"!!
3 Swipe the card.
4 Swipe the next card, as required.
5 When finished, press B to go back to programming
mode.
6 Press B one more time to leave programming mode.