BEVS Industrial Co., Ltd
4
Website: www.bevsinfo.com Email: [email protected] Tel: +86 20 22197699
1) Runtime setting
:
click
button to increase dispersing time, click
button to reduce dispersing time.
2) Speed: Slide
button to right/left to increase/decrease rpm.
2. RunSet button
Click it to enter the window below:
MaxSpeed: the max speed which mixer can run;
Runtime: the mixer’s running duration;
Speed: the real running speed, it must be lower than the MaxSpeed.
3. SysSet button
Click it to enter the window below, change the setting if needed.
2.3 Use steps
1. Loosen the shaft lock knob, rotate the lifting knob to lift the dispersing shaft;
2. Fix the selected dispersing disc clockwise to the dispersing shaft. Use M8 hex bolts to connect the disc to the
bottom of the shaft, and use wrench to tighten the bolts.