36
Energy Level
Energy level determines the intensity of the SensEpil™ by beurer light pulse delivered to your skin, from the lowest level
(-) to the highest level (+). Corresponding
INDICATOR LIGHTS
on the
CONTROL PANEL
represent the increases in energy. As
energy level increases, so does hair removal results as well as the risk of possible side effects and complications.
Always start your fi rst SensEpil™ by beurer hair removal session at the lowest energy setting.
If you experience little or no discomfort during and after the hair removal session using the lowest energy level, raise
the energy level by one
INDICATOR LIGHT
at the next session, and so on for each subsequent session.
The Skin Color Sensor
Light-based hair removal on darker skin tones can result in adverse effects such as burns, blisters, and skin color changes
(hyper- or hypo-pigmentation).
To prevent such misuse, a unique
SKIN COLOR SENSOR
in SensEpil™ by beurer measures the treated skin complexion at the
beginning of each session and occasionally during the session. If the
SKIN COLOR SENSOR
detects a skin tone that is too dark
for SensEpil™ by beurer application, the device will automatically stop emitting pulses.
If you see no light pulse and the
SKIN TONE WARNING INDICATOR LIGHT
blink for 3 seconds, this is an indication that your skin
tone, measured by the
SKIN COLOR SENSOR
, is too dark for safe application. Try using the device on a different body part or
contact the SensEpil™ by beurer support.
Whenever SensEpil™ by beurer is turned on its energy level will automatically be reset to the lowest energy level. Only
one
ENERGY LEVEL INDICATOR LIGHT
will be on.
To set the energy level, press the
ENERGY LEVEL SETTING BUTTONS
using “-” or “+” to respectively decrease or increase the
energy level. The number of
ENERGY LEVEL INDICATOR LIGHTS
will coincide with the change in energy level.
For your safety, when using SensEpil™ by beurer for the very fi rst time, the system is automatically set to deliver the fi rst
50 pulses at the lowest energy level, and the next 200 pulses at up to level 3.
To cancel these safety settings press and hold the “+” and “-”
ENERGY LEVEL SETTING BUTTONS
simultaneously until you
hear 2 consecutive “beep” sounds.
To restore these safety settings press and hold the “+” and “-”
ENERGY LEVEL SETTING BUTTONS
simultaneously until you
hear 3 consecutive “beep” sounds.
Do not raise the energy level if you experience abnormal discomfort during or after treating with
SensEpil™ by beurer! (See “Possible Side Effects”)
Do not raise the energy level during hair removal session even if you experience no discomfort.
Discomfort may also appear some time after the session.
