Beurer MG 156, Инструкция по эксплуатации

Страница: 5 / 20

5
1 3 massage motors
2 Fastening straps
3 Plug connector with AC-Adapter and Car adapter
4 Control panel
5 MASSAGE button
6 HEAT button
6. Initial use
WARNING:
• Packaging materials are a deadly hazard for chil-
dren and can cause suffocation. Remove all pack-
aging materials immediately and keep them away
from children at all times.
• Use the unit only on human beings and for its in-
tended purpose and in the manner described in
these instructions for use. Any improper use can
be dangerous!
• Do not subject the device to any impact and do
not drop it.
• Do not use the device if damage is evident to the
device itself or any of its accessories.
• Connect the power supply unit and car adapter to
the seat cover using the connector.
• Route the cable safely so that there is no risk of
anyone tripping over it.
Before first use
• Remove all packaging materials. Ensure that the
packaging materials are disposed of properly due
to risk of suffocation.
• Position the seat cover on a suitable seating sur-
face (chair, sofa, or similar). Ensure that the seat
cover is supported over its entire area and has a
sufficiently high backrest.
• In order to secure the seat cover, use the flexible
tie straps if necessary.
• Connect the power supply unit to the seat cover
using the connector.
• Plug in the power supply to the wall outlet.
7. Operation
DANGER:
• Never touch the unit, including the AC-Adapter/Car
adapter, with wet hands while it is plugged in. This
can cause an electric shock.
• Do not pull the AC-Adapter from the power outlet
by the cord. Always grasp the AC-Adapter housing
and unplug it. Failure to do so could result in risk of
electric shock, short circuiting, or fire.
• Do not pinch or bend the power cord or pull it over
sharp objects. This can cause an electric shock.
• The AC-Adapter has a polarized plug (one blade is
wider than the other). As a safety feature, this plug
will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Do
not modify the plug in any way. Do not attempt to
manipulate this safety feature.
• Do not use extension cords, multi-sockets and/
or voltage converters when using the AC-Adapter.
WARNING:
• Before using the AC-Adapter/Car adapter, check
the data tag sewn onto the side of the massager
to ensure that the voltage and wattage indicated
on the unit correspond to the voltage and watt-
age available.
• Lay the power cord in such a way that no one can
trip over it. There is a danger of injury due to e.g.
stumbling, tripping, falling down.
Operating the device with the AC-Adapter
Plug the AC-Adapter (item 3 from picture above) only
into a 120 Volt AC wall outlet only.
• Ensure that there is a power outlet near to where
the device will be used.
• Insert the power supply into a suitable power outlet.
• Push the plug completely into the power outlet.
• To disconnect the massage seat cover from the
power source after use, first switch off the device
before removing the AC-Adapter (item 3 from pic-
ture above) from the outlet.
WARNING:
Never have a massage with the massage seat
cover while you are driving a car yourself.
The massage, as well as the device setting, distracts
you from the road traffic. Your attention to the road
traffic must never be impaired by the device. There-
fore only use this device as a passenger or if you
take a break and the vehicle is stationary. Please
note that if the engine is off the battery can discharge
under certain circumstance. For some vehicles the
12 V jack only works when the engine is on.
A massage with this seat cover can be very relaxing
and regenerating while taking breaks.
Operating the device with car adapter
The massage seat cover can also be used in the car
with the car adapter supplied. Plug the car adapter
connector plug into the connection jack on the de-
vice. Plug the car adapter into the cigarette lighter
jack or an alternative 12 V jack. (e.g. trunk). Operation
proceeds as described above.
How to use
Before use, ensure the device and accessories are
at room temperature.