Beuchat Mundial 3, Руководство пользователя

Страница: 30 / 36

30 © 2002 Design, 2014 Doc. No. 12-5372-r01 (4/23/14)
User Manual
CARE AND CLEANING
Protect your Mundial 3 from shock, excessive temperatures, exposure to chemicals, and tampering. Protect the lens against scratch-
es with a Instrument Lens Protector. Small scratches will naturally disappear underwater.
• Soak and rinse the Mundial 3 in fresh water at the end of each day of diving, and check to ensure that the areas around the
Low Pressure (Depth) Sensor (Fig. 69a), PC Interface Data Port (Fig. 69b), and Buttons are free of debris or obstructions.
• To dissolve salt crystals, soak in lukewarm water or a slightly acidic bath (50% white vinegar/50% fresh water). After removal
from the bath, place the Mundial 3 under gently running fresh water and towel dry before storing.
• Transport your Mundial 3 cool, dry, and protected.
INSPECTIONS AND SERVICE
Your Mundial 3 should be inspected annually by an Authorized Beuchat Dealer who will perform a factory prescribed function
check and inspection for damage or wear. To keep the 2 year limited warranty in effect, this inspection must be completed one
year after purchase (+/- 30 days).
Beuchat recommends that you continue to have an inspection performed every year to ensure it is working properly. The costs of
annual inspections are not covered under the terms of the 2 year limited warranty.
To Obtain Service:
Take your Mundial 3 to an Authorized Beuchat Dealer.
BATTERY REPLACEMENT
NOTE: The procedures that follow must be closely adhered to. Damage due to improper Battery replace-
ment is not covered by the 2 year warranty.
The Battery Compartment should only be opened in a dry and clean environment with extreme care taken to prevent the entrance of
moisture or dust.
As an additional precautionary measure to prevent formation of moisture in the Battery Compartment, it is recommended that the
Battery be changed in an environment equivalent to the local outdoor temperature and humidity (e.g., do not change the Battery in
an air conditioned environment then take it outside during a hot sunny day).
Inspect the Buttons, Lens, and Housing to ensure they are not cracked or damaged. If there is any sign of moisture in the Mundial 3,
DO NOT attempt to use it for diving until it receives proper service by the Beuchat factory.
CAUTION: Damage due to improper Battery replacement is not covered by the limited 2 year warranty.
When the battery is removed, settings and calculations for repetitive dives are retained in the unit's memory
while a new battery is installed.
Battery Removal
• Locate the Battery Compartment on the back of the unit.
• Rotate the Battery Cover clockwise 10 degrees using the special Battery Cover Tool provided (Fig. 70A), or by pushing the
lower portion to the left while pushing the upper portion to the right (Fig. 70B).
• Lift the Cover with O-ring up and away from the Housing.
WARNINGS:
Never, under any circumstances, poke any object through any slots or holes of the module. Doing so may damage the
depth sensor, possibly resulting in erroneous depth displays.
If you are in doubt about the accuracy of your unit's depth readings, DO NOT attempt to dive with it until it has been in-
spected by Beuchat.
Never pressure test the module in an air environment. Doing so may damage the depth sensor, possibly resulting in
erroneous depth or time readings.
Never spray aerosols of any kind on, or near, an Beuchat instrument. The propellants may chemically attack the plastic.
When a Low Battery condition is displayed prior to a dive, DO NOT attempt to dive with the unit until the battery is
replaced.
b
a
Fig. 69 - CASE BACK
Fig. 70A - BATTERY
COVER REMOVAL
(using tool)
Fig. 70B - BATTERY
COVER REMOVAL
(without tool)