Beuchat Mundial 3 Скачать руководство пользователя страница 3

Страница: 3 / 36

Doc. No. 12-5372-r01 (4/23/14)

User Manual

INITIAL ACTIVATION

Beuchat Watch type dive gauges are placed in a Deep Sleep mode prior to being shipped from the factory. The intent is to extend

storage life of the Battery for up to 7 years, before the unit is initially placed in service.

In this mode, Date and Time are updated as they normally would be. However, they are not displayed. Upon waking the Mundial 3

up, the correct Date and USA Pacific Time will be displayed and it will be ready to operate with full functions.

To wake the Mundial 3 up from Deep Sleep mode, simultaneously depress the upper/right (S) and lower/left (A) buttons for 2 seconds

until the display comes full ON displaying the MAIN TIME screen, then release them.

Once the Mundial 3 is brought out of the Deep Sleep mode, it can only be placed back in it by the factory.

FULL LCD

Components:

a. Mode (M) Button

b. Select (S) Button

c. Light (L) Button

d. Advance (A) Button

e. LED Warning Light

f. Icon - Low Battery

g. Icon - Time Am/Pm

h. Icon - Log Mode

i. Icon - Surface Interval Time

j. Icon - Degrees (Temp)

k. Icon - Elapsed Dive Time

l. Icon - Daily Alarm set

m. Icon - Depth/Max Depth

Содержание Mundial 3





































Результаты поиска

Содержание Mundial 3

Отзывы:

Похожие инструкции для Mundial 3

Бренды по названию

Популярные бренды

Beuchat Mundial 3, Руководство пользователя

Результаты поиска

Содержание Mundial 3

Отзывы:

Похожие инструкции для Mundial 3

Бренды по названию

Популярные бренды