Bettio Picoplis, Инструкция по установке, эксплуатации и обслуживанию

Страница: 53 / 65

withstand with the flyscreen fully unwound from the cassette, and that is a wind speed of 130 km/h. With hollow bricks use suitably sized
expansion plugs with chemical adhesive.
If the resistance requirements necessary for safe fixing are not satisfied, increase the number of wall plugs and screws.
The screws and wall plugs also depend on the state and the nature of the structure, masonry/metal/wood window/door frame, onto which the
installation/fixing is to be carried out. Wall plugs and screws are not supplied with the product. Take care when handling the product: the winder mecha-
nisms are mounted with loaded springs. The instructions for installation are described on the sheet contained in the pack. Any sealing must be done
with neutral silicone resin.
The flyscreen must be closed when the wind speed reaches 20 km/h.
8. MAINTENANCE
8.1 Routine maintenance
Given the high quality of the materials used in making the flyscreen, no routine maintenance is envisaged other than cleaning the mesh to protect it
against the formation of mould/mildew caused by dust or other material being deposited on them. In addition, periodic cleaning prevents the buildup of
dust or other materials that may compromise the proper functioning of the product. The mesh must be visually inspected at least twice a year; a mesh
screen should be checked in spring before being used for the summer and in autumn before packing it up for the winter. The mesh may be cleaned with
a vacuum cleaner or with a sponge or cloth dampened with lukewarm water. Let the mesh dry thoroughly after cleaning before winding it up.Do NOT
use solvents, ammonia or hydrocarbons for cleaning.
CAUTION: cleaning carried out using steps, platforms or such must only be done by specialised personnel working in conformity with safety
regulations and who must use suitable personal protective equipment such as body harnesses with separate safety line (see Italian Legisla-
tive Decree 81/2008).
8.2 Extraordinary maintenance
CAUTION: only professionally qualified and trained personnel may carry out extraordinary maintenance: it is therefore necessary
to request the service of a specialist. If the flyscreen or any part of it needs to be dismantled, see the installation instructions. If the mesh is
torn, however small the tear, it must be replaced.
Only use original spare parts otherwise the warranty is invalidated.
9. WARRANTY
The warranty is applicable in relation to the contents of Italian Legislative Decree No. 24 of 02.02.2002. The Warranty is for 24 months (or more when
explicitly indicated) and covers natural persons who purchase the product for purposes that may be considered unrelated to their professional activity
(private end customer).
The warranty is for 12 months if the product is invoiced to a Company or Professional office subject to VAT.
The warranty covers any part or parts which are shown to be defective due to faulty material or workmanship. The company will not be responsible for
any incidental or consequential damage or injury. The warranty does not cover any costs incurred to reach the place where the product is installed nor
any costs for installation or removal.
As is accepted practice, the original invoice or receipt is evidence of the date of purchase and therefore of the validity and duration of the warranty.
9.1 Rules for the Warranty to be valid
Sicurezza - Normative
Safety - CE rules
Sicherheit und Vorschriften
Sècuritè et normes
Seguridad y normas