April 2005
Target: Terror / Target: Force • Copyright 2005 • Raw Thrills Inc • All rights reserved.
5
SECTION 1: INTRODUCTION
Please read this manual carefully before you begin the installation process. Verify that the
cabinet to be used for conversion is fully functional. This kit conversion requires some
familiarity with AC voltage and safety around electronic devices. If at any point you are
uncertain as to how to proceed during this conversion,
STOP
and call Betson Enterprises
at 1-800-524-2343.
Please refer to the basic conversion cabinet checklist below before you continue.
1. Cabinet is structurally sound.
2. Inside cabinet is free of loose debris and exposed wiring.
3. Game currently installed is fully functional. Check to make sure that:
•
Player 1 and 2 Start Buttons working.
•
Coin 1 and 2 switches are working.
•
Coin meter is working.
•
Coin door lamp is correct voltage type and working.
•
Picture is adjusted for proper linearity, brightness, contrast and color
•
5 and 12 JAMMA Voltages are set correctly. They should read between 4.9 –
5.1VDC and 11.8 – 12.2VDC, respectively at the JAMMA connector while
connected to the old game CPU.
•
Sound from cabinet speakers is present.
Please correct any problems found before you continue. This will help to ensure an easy
and successful Conversion Kit installation.
Kit Contents
:
Please make sure that you have all the following items from your kit. If you are missing any
of these items,
STOP
and call Betson Enterprises at 1-800-524-2343.
1. Kit Chassis Bracket
2. Manual
3. Restore DVD
4. Hardware Kit Set
5. “Target: Terror” Marquee Graphics
6. “Target: Force” Marquee Graphics
7. Left Side Cabinet Decal
8. Right Side Cabinet Decal
9. Control Panel Overlay
10. Red Gun
11. Blue Gun
12. Holsters (Qty 2)
13. Hard Drive
