manualshive.com logo in svg

Betson RAW THRILLS Target: Force Gold, Руководство пользователя

Поделиться
Скачать
Betson RAW THRILLS Target: Force Gold Скачать руководство пользователя страница 8

April 2005 

Target: Terror / Target: Force • Copyright 2005 • Raw Thrills Inc • All rights reserved. 

               8

 

  

Making the Electrical Connections 

 

 

NOTE:

 

  Make sure the game is unplugged and with the game power switch to the OFF 

position before you begin. Please refer to Fig. A “Kit Chassis Block Diagram” for 
connector locations.

 

 
 
 

 

AC Service to Power Supply 
 
1.  Locate the AC line cord and the terminal block provided with the kit. 
2.  Use the terminal block as a means of connecting the stripped end of the line cord to the 

game AC line.  Do not bypass the game cabinet main fuse and main power switch when 
making the AC connection! 

3.  Connect the IEC plug end of the line cord to the uATX power supply on the kit. 
4.  Double-check your AC connections before you proceed.  
 
Hard Drive Installation 
 
1.  Locate the hard drive and the mounting screws from the hardware bag. 
2.  Mount the hard drive to the kit mounting bracket using the supplied thumbscrews.  
3.  Connect the ribbon cable from the motherboard to the hard drive. 
4.  Connect power to hard drive from the uATX power supply. 
 
Watchdog Harness Connection 
 
Note: The game will not be playable unless the Watchdog Harness is connected and 
enabled. For stable game operation this procedure must be done correctly. The Watchdog 
mechanism allows the game to automatically recover in case a problem is encountered.  
Refer to Appendix E for JAMMA pin locations. 
 
1.  Locate two JAMMA pin terminated wires originating from the Watchdog Harness on the 

kit chassis (Violet and Black). 

2.  Connect the Violet wire to pin A9 (Coin Lockout 1) on the JAMMA connector.  
3.  Connect the Black wire to any available ground pin on JAMMA connector at location A1, 

A2, B1, B2, A27, A28, B27, B28. 

4.  Double-check your connection before you proceed.  The game will test for this 

connection the first time it boots up, and will issue an error message if it fails. 

 
JAMMA Edge Connector 
 

Note: JAMMA Connector should be secured with a strain relief or its harness secured by a cable 
clamp close to the JAMMA connector to prevent loose connections. Take care that JAMMA 
connector oriented correctly, just in case the polarizing key is missing! 

 
Gun JAMMA I/O Input Connection 
 

Содержание RAW THRILLS Target: Force Gold





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды