BETCO STEALTH DRS24BT Скачать руководство пользователя страница 61

Страница: 61 / 64

Operational testing of the machine

Check the function of switches and signal lamps.

Check the function of the operator seat micro switch.

Check the function of the speed control pedal.

Check the function of the brush deck.

Check the function of the brush motor.

Check the function of the sideways squeegee movement.

Check the function of the solenoid valve.

Check the function of squeegee operating modes.

Check the function of the vacuum motor.

Check the function of the emergency and parking brakes.

Check the function of the steering.

Check the state of the batteries, terminals and cables.

Check the function of the horn.

Check the function of fl ashing lights.

Operational tests of the machine

Fill the tanks with water and check for leaks.

Check the plumbing system for leaks and that water fl ows to the brush.

Adjust the squeegee inclination and perform an operating test.

Adjust the brush deck inclination and perform an operating test.

Adjust the side brush deck splash guards and side bars by performing an operating test.

Check the function of the parking and emergency brakes:

Check forward gear, reverse motion, acceleration and braking.

Final test

Check all functions: washing, drying, forward gear, reverse motion and braking.

CHECK LIST

Содержание STEALTH DRS24BT

































































Результаты поиска

Содержание STEALTH DRS24BT

Отзывы:

Похожие инструкции для STEALTH DRS24BT

Бренды по названию

Популярные бренды

BETCO STEALTH DRS24BT, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание STEALTH DRS24BT

Отзывы:

Похожие инструкции для STEALTH DRS24BT

Бренды по названию

Популярные бренды