BETCO STEALTH DRS24BT, Руководство оператора и каталог запасных частей

Страница: 10 / 64

10
1. PREPARING FOR OPERATION
A. Prepare the machine.
B. Sit in the driving position.
C. Check that the parking brake is released.
D. Turn the ON/OFF key a quarter of a turn clockwise. The battery and hour
meter display turns on immediately.
E. Place the squeegee raised/lowered switch (1) in the lowered position. The
vacuum motor will start.
F. Place the brush deck raised/lowered switch (2) in the lowered position until
till the brush deck lowers completely.
G. The brush will not start turning until the speed control pedal is pressed.
H. Place the forward/reverse selector (3) in the forward position. The machine
has two forward speeds indicated by the symbols on the label at the side of
the switch: tortoise=slow forward, hare=fast forward.
I. Open the water fl ow by raising the water control knob. Water will not fl ow
until the machine moves forward.
J. Press the speed control pedal. The machine will start moving, the squeegee
will lower and the brush starts to rotate. During the fi rst few feet of work,
check that the amount of cleaning solution dispensed is appropriate and that
the squeegee dries well.
If you encounter problems while working, turn off the key and apply the
emergency brake by pushing the brake pedal down and pulling it toward you
until it latches in place.
These actions stop all movement of the machine. To
resume work after resolving the problem turn the key switch on and release the
parking brake pedal.
OPERATION