manualshive.com logo in svg

BETCO Stealth ASD20BT, Руководство оператора и каталог запасных частей, Страница: 65 / 68

Поделиться
Скачать
BETCO Stealth ASD20BT Скачать руководство пользователя страница 65

65

Functional check of the machine

 

Check the functionality of switches.

 

Check the functionality of the switch lever.

 

Check the functionality of the brush deck.

 

Check the functionality of the brush motor.

 

Check the functionality of the solenoid valve.

 

Check the functionality of the vacuum motor.

 

Check the functionality of the brakes.

 

Check the functionality of batteries and power cables.

Functional test of the machine

 

Fill up the tanks completely and verify the sealing.

 

Verify the sealing of all the water plant and that the water is dispensed through the brush.

 

Adjust the inclination and the height of the squeegee blades doing a functional test.

 

Adjust the inclination of the brush deck and do a functional test.

 

Check the efficiency of the parking brake.

 

Verify the forward and backward movement, acceleration and braking.

Final test

 

Check all the functions: washing, drying and movement.

CHECK LIST

SQUEEGEE ADJUSTMENT

1.  Adjust the inclination adjuster of the squeegee blade until the blade has a 

common inclination over its entire length.

2.  Adjust the height of the wheels using the knob checking that the blade has an 

inclination between 30 and 45 degrees.

 

3.  Verify the cleanliness and sealing of the squeegee hose adapter.

Содержание Stealth ASD20BT





































































Отзывы:

Нет отзывов