BETCO Stealth ASD20BT, Руководство оператора и каталог запасных частей, Страница: 62 / 68

62
BATTERY CHECK CARD / HOUR METER - BEFORE SERIAL NUMBER
214999999
1. Verify that turning on the machine the battery check card has the follow-
ing starting sequence:
• Turning on of the LED which correspond to the set-up (red LED = “0”).
• Turning on of all the LEDs (check of the lamps)
• Turning on of the LEDs depending on the charge of the battery
2. Verify the hour meter functionality
• To verify which is the set-up you simply need to turn on the machine
and check which is the first LED that turns on. Counting the LEDs since
the left side any LED correspond to a position and the LED which turn
on correspond to the current set-up.
• Verify that if the machine uses wet cell batteries the adjustment is on
position 1.
• Verify that if the machine uses GEL batteries the adjustment is on posi-
tion 4.
WARNING: A wrong set-up of the battery control card can
compromise the battery efficiency and damage then in ir-
reversible way.
1. Fill up the solution tank and verify the sealing of the gasket particularly
on the solution valve and on the drain plug .
2. Verify that the water distribution on the floor is even and dependent on
the solution valve adjustment.
3. Check the internal cleanness of the water valve. If necessary clean it us-
ing a metal bar putted inside the threaded hole of the filter plug.
4. Verify the cleanness and functionality of the solution filter under the
solution tank plug.
SOLUTION TANK INSPECTIONS
1
4