BETCO Stealth ASD20BT Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 68

BETCO Stealth ASD20BT Скачать руководство пользователя страница 18

18

1. CLEANING THE SQUEEGEE HOSE

Every week, or whenever vacuum seems to be unsatisfactory, check the squee-

gee hose for obstructions. To clean it:

A. Remove the vacuum hose from the squeegee shoe adapter on the squeegee

shoe.

B. Remove the other end from the recovery tank.

C. Wash the inside of the hose with water from the end that it is connected to

the tank.

D. Reassemble the hose.

WARNING: Always wear gloves when doing this operation to pro-

tect yourself from contact with hazardous chemicals.

2. CHECKING THE BRAKE

Every week, check the distance between the work brake pads and the wheels. If

necessary, adjust so they are at a distance of 0.12 in (3 mm) when released.

3. CLEANING THE SOLUTION TANK

A. Remove the solution tank cap.

B. Rinse with water.

C. Remove the drain cap (

1

) located on the filter, and empty the tank.

WARNING: Always wear gloves when doing this operation to pro-

tect yourself from contact with hazardous chemicals.

WEEKLY MAINTENANCE

«
...
16
17
18
19
20
...
»

Содержание Stealth ASD20BT





































































Отзывы:

Нет отзывов