BETCO FOREMAN AS20B, Руководство оператора

Страница: 51 / 58

ADJUSTMENTS
AND
INSPECTIONS
MAXIMA
Doc. 10004809
Emesso dec
-06
Rev. 00
Pag. 1 di 7
ADJUSTMENTS AND INSPECTIONS / ALL MODELS
READ THE OPERATING AND MAINTENANCE MANUAL
Inspection Electrical Equipment
1. Check functionality electrical equipment:
switches, motors, solenoid valve.
2. Check functionality control coupling-uncoupling
brush, where this is assembled.
3. Check the condition of the fuses placed behind
the rear grey panel
4. Check functionality chopper (traction machine)
5. If necessary set the chopper card proceeding
as follows
:
x
Lift the machine (traction wheels must be free)
x Take off the rear screws to open the panel;
take off the fixing screw and lower the
complete electric group
x Insert the tester prods (V-DC) onto the faston
M+ and M- of the chopper card
x Switch on through the general key
x Adjust trimmer “ACC” (acceleration) rotating
the left screw up to the end, then position it on
45°
6. Press onto the lever placed on the handle bar in
forward movement, until the release of the
drive relay is heard, then stop.
7. Adjust the trimmer Vmin (minimum) until
the value on the tester is read, which is
between
3-5 V.