BETCO E29941-00 Скачать руководство пользователя

Страница: 48 / 52

Functional check of the machine

Check the functionality of switches and warning lamps.

Check the functionality of the switch lever.

Check the functionality of the brush deck.

Check the functionality of the brush motor.

Check the functionality of the solenoid valve.

Check the functionality of the vacuum motor.

Check the functionality of the brakes.

Check the functionality of batteries and power cables.

Functional test of the machine

Fill the tanks completely and verify that there are no leaks.

Adjust the inclination and the height of the squeegee blades.

Adjust the inclination of the brush deck.

Check the function of the parking brake.

Verify the forward and backward movement, acceleration and braking.

Final test

Check all the functions: washing, drying and movement.

CHECK LIST

Содержание E29941-00





















































Результаты поиска

Содержание E29941-00

Отзывы:

Похожие инструкции для E29941-00

Бренды по названию

Популярные бренды

BETCO E29941-00, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание E29941-00

Отзывы:

Похожие инструкции для E29941-00

Бренды по названию

Популярные бренды