DBB0202
19
Secure the work piece to a stable surface with clamps or other practical tools. Do not hold the work piece in your
hand or against your body as this is unstable and can result in a loss of control.
Do not force the tool. Always use the correct tool for the job. The tool does the job better and safer when used at
the operating speed for which it was designed.
Do not use the tool if it cannot be switched on and off using the power switch. Power tools that cannot be
controlled with the power switch are dangerous and must be repaired.
Disconnect the battery pack from the tool or put the switch in the locked or OFF position before carrying out
adjustments, changing accessories or putting the tool away.
These safety precautions reduce the risk of accidently starting the power tool.
Keep power tools out of the reach of children and other unauthorised persons when not in use.
Tools are dangerous if used by inexperienced people.
When the battery is not being used, it must be kept away from other metal objects such as paperclips, coins, keys,
nails, screws and other small metal objects that can form a connection between two terminals. If the battery
terminals are short-circuited, sparks, burns or fire can occur.
Maintain the tool in good order. Keep cutting tools sharp and clean. Tools that are maintained correctly and have
sharp edges jam less frequently and are easier to control.
Make sure that moving parts are properly adjusted and do not jam and that no parts are damaged. Check for other
factors that could affect the operation of the power tool. If damage is found, the tool must be serviced before it is
used. Many accidents are caused by poorly maintained power tools.
Only use accessories recommended by the manufacturer for your model. Accessories that are suitable for one tool
may pose a risk of injury if used with another tool.
Service work should be carried out by qualified service personnel only. There is a risk of accident or injury if
service or maintenance work is carried out by unqualified persons.
Use only identical spare parts when servicing a tool. Follow the instructions in the Maintenance section in the
manual. Failure to follow maintenance instructions or use of non-approved parts may pose a risk of electric shock
or injury.
Hold the power tool by the insulated grips when working in areas where the tool may come into contact with
concealed electrical cables or its own power cord.
In the event of contact with a live cable, the metal parts of the tool also become conductive and the user receives an
electric shock.
Always wear protective eyewear when working with the tool. Use a dust mask or dust shield for work that creates
dust.
Secure the material to a stable surface. Never hold it in your hands or across your legs. If the material is not
supported sufficiently, you may lose control and become injured.
Always hold the circular saw firmly with both hands while working. Always keep hands and feet away from the
grinding area. Do not hold the tool too tightly and keep hands away from the blade. Keep your hands at a safe
distance from the blade. Never put your hand under the tool when the blade is moving. Do not use your legs or feet
to hold the work piece steady.
Position yourself so that you can never become trapped between the tool or side handle and walls or doors. If the
mounting or attachment jams while working, the torque that then occurs in the tool can injure your hands or legs.
Hold the power tool by the insulated grips when working in areas where the tool may come into contact with
concealed electrical cables or its own power cord. If the blade comes into contact with a live cable, the metal parts
of the tool can become sufficiently conductive to give the user a serious electric shock. In the event of contact with
a live cable, the metal parts of the tool also become conductive and the user receives an electric shock. Do not saw
or break into existing walls or other areas with restricted visibility where there may be electrical cables. If this
cannot be avoided, disconnect all fuses or circuit breakers that supply the work location.
The saw must always be turned off when carrying it at your side. A moving blade can catch in clothing and cause
injury.
Disconnect the battery pack from the tool and put the switch in the locked or OFF position before making any
adjustments, changing accessories or carrying out inspections, maintenance or cleaning. These safety precautions
reduce the risk of accidently starting the power tool.
Do not use the circular saw if it has been damaged, left outside in the rain or snow, exposed to wet or damp
conditions or has been immersed in water.
Do not use blunt or damaged blades.
Keep cutting tools sharp and clean. Cutting tools that are maintained correctly and have sharp edges jam less
frequently and are easier to control.
Содержание DBB0202
Страница 26: ...DBB0202 26 ...
