BETAFPV LiteRadio 2 SE, Быстрый старт

Страница: 3 / 16

02
1.Button Functions
●
BIND Button: Enter binding mode after radio transmitter is powered on.
●
SETUP Button: Enter joystick calibration mode after radio transmitter is powered
on.
●
Power Button: Turn the transmitter o /on.
There are three buttons on remote control radio transmitter.
2.Power On/O
POWER ON: Long press the power button on the transmitter for 3 seconds until it
beeps three times (do re mi) then release. The radio transmitter LED ring will ash
red quickly, then remain blue.
POWER OFF: A long press of the power button on the radio transmitter will turn it
o after three beeps (mi re do).
3.LED Indicator and Buzzer
The LED light indicates the working status of the radio transmitter.
Reason Solution
Red light solid on
The throttle joystick or
switches are not in the lowest
Lower throttle and switches
to the lowest position.
Turn to blue then.
Red light ashing quickly
Blue light ashing slowly
Red light breathes slowly
Green light breathes slowly
The radio transmitter
is binding
Batte reaches the low
voltage limit
On charging
Charge complete
Charge the transmitter
Wait for completing binding
State of the LED Ring
The buzzer will alarm three times, which indicates a low batte and needs to be re-
charged.