Beta Max SCAFF-TRAC 6-11, Руководство оператора

Страница: 8 / 39

8 BETA MAX PORTABLE HOIST SYSTEMS
Scaffolding frames must be in good condition and free of dents, bends, heavy corrosion, cuts,
modifications or any other damage. All X-braces must be in place and secured before attempting to
install the Scaff-Trac. Scaffolding frames must be pinned or bolted to the frames below and all
frames must be anchored to the vertical building face. Check with the scaffold manufacturer for the
correct way to erect and anchor your scaffolding. Use no less than two people to install the Mono-
rail/Trac.
The design of the saddles and mounting brackets on the Scaff-Trac are intended to allow mounting
on various brands of scaffolding. The spacing (dimension-X on diagram) between the top and
bottom horizontal ledger on 6 ft. walk-thru frames can and does vary from one brand of scaffolding
to another. The amount of space or play between the top of the Scaff-Trac and the lower horizontal
ledger of the scaffold frame should be as small as possible. The saddles and mounting brackets are
designed with multiple holes to allow mounting to various manufacturers scaffold frames. These
holes allow for minimum top to bottom ledger distance of 5/8”, an intermediate distance of 6” and
maximum distance of 6 1/4”.
INSTALLATION OF THE SCAFF-TRAC MONORAIL
1. Place one saddle over the center of each of the scaffolding frames. The holes in the saddles
should line up. There are two sets of holes on each saddle to allow for different manufacturers
scaffolding frames.
2. Raise both ends of the Scaff-Trac Monorail/Trac to the under side of the saddles and insert the
pins into the same set of holes on each saddle. The monorail must be level.
INSTALLATION OF THE SCAFF-TRAC EXTENSION
List of Parts:
2 ea. Saddles
1 ea. Scaff-Trac Monorail/Trac (7 ft. length)
4 ea. Mounting Pins with Keys
1 ea. Inboard End Retaining Pin
1. A Scaff-Trac monorail must first be correctly mounted.
2. Place the saddle over the next scaffolding frame on the inboard side of the mounted Scaff-Trac.
3. Raise the outboard end of the Monorail/Trac extension to the inboard end of the Scaff-Trac and
correctly align it with the ears and alignment tabs. The extension will slide into place.
4. Raise the inboard end of the extension to the saddle and secure it with the pins.
5. Install succeeding extensions in the same manner.