Selected Location
WARNING:
The selected location has to be able to support of supporting the
expected load.
WARNING:
An adequate drainage system has to be provided to deal with overflow
water for both indoor and outdoor installations.
IMPORTANT:
Because of the combined weight of the Lay-Z-Spa, water, and users, it
is extremely important that the base where the Lay-Z-Spa is installed is smooth, flat,
level and capable of uniformly supporting the weight for the entire time the Lay-Z-Spa
is installed (not on the carpet or other similar material). If the Lay-Z-Spa is placed on
a surface, which does not meet these requirements, any damage caused by
improper support is not covered under the manufacturer’s warranty. It is the
responsibility of the Lay-Z-Spa owner to assure the integrity of the site at all times.
1. Indoor Installation:
Be aware of special requirements if you install the spa indoors.
• Humidity is a natural side effect with Lay-Z-Spa installation. Determine the effects
of airborne moisture on exposed wood, paper, etc. in the proposed location. To
minimize these effects it is best to provide plenty of ventilation to the selected
area. An architect can help determine if more ventilation is needed.
2. Outdoor Installation:
• During filling, draining or when in use, water may flow out of the spa. Therefore
the Lay-Z-Spa should be installed near a floor drain.
• Do not leave the spa's surface exposed to direct sunlight for long periods of time.
6