background image

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

WARNING

When installing and using this electrical equipment, basic safety precaution should 

always be followed, including the following:

IMPORTANT SAFETY INSTRUCTIONS - READ AND 

FOLLOW ALL INSTRUCTIONS.

WARNING:

• The spa must be supplied through an isolating transformer or supplied through a 

residual current device (RCD) having a rated residual operating current not 

exceeding 30mA.

• The pump must be tested before each use, to test follow the instruction of pump.

• If the supply cord is damaged, it must be replaced by the manufacturer, service 

agent or similarly qualified persons in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension cord to connect unit to 

electric supply; provide a properly located outlet.

• No part of the appliance is to be located above the bath during use.

• Parts containing live parts, except parts supplied with safety extra-low voltage not 

exceeding 12V, must be inaccessible to a person in spa pool; Parts incorporating 

electrical components, except remote control devices, must be located or fixed so 

that they cannot fall into the spa pool.

• The plug of pump shall be more than 3.5m away from the spa.

• It is necessary to have the plug accessible after installation of the spa.

• TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA WHEN IT IS RAINING.

• Never wear your contact lenses when in your spa.

• Do not use spa during chemical maintenance.

• The power source on the wall of building should keep more than 4m away from pool and at a 

height of 1.2m at least.

• Extension cords can’t be used.

• Don’t plug or unplug the appliance if hand is wet.

• Always unplug the appliance:

  - on rainy days

  - before cleaning or other maintenance

  - if leave it unattended on holidays

WARNING: Always keep plug dry, plug in with wet plug is definitely forbidden!

• The plug shall be directly connected only to a socket-outlet of the fixed electrical 

installation.  

• When the appliance will be not used for a long time, such as in the winter, the spa 

or pool set should be disassembled and stored indoor.

• 

Caution 

- Read the instruction before using the appliance and installation or 

reassemble every time

• Safekeeping the instruction. If instruction is missed, please contact with 

manufacturer or search it in website www.bestwaycorp.com

• Warning: For electric safety, a leakage current detecting device is incorporated in the 

power cord, if the leakage current is detected more than 10mA, the device will operate 

and cut-off the power supply, in such case, please unplug and stop using the spa at 

once. Don't reset the product by yourself. And you must contact the local service 

agent to check and repair the product.

• The appliance must be supplied by earthed power source.

• 

WARNING 

- This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning use 

of the appliance by a person responsible for their safety. Children should be 

supervised to ensure that they do not play with the appliance.

• Cleaning and user maintenance must be performed by an adult above18 years old 

who is familiar with the risk of electric shock;

• Water attracts children; always attach a spa cover after each use.

• Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge trimmers, 

and other equipment.

• Risk of Accidental Drowning. Extreme caution must be exercised to prevent 

unauthorized access by children. To avoid accidents, ensure that children can not use 

this spa unless they are supervised at all times.

• RISK OF INJURY. 

Never operate spa if inlet / outlet pipes are broken or missing. 

Never attempt to replace the inlet / outlet pipes. Always consult your local Aftersales 

centre.

• RISK OF ELECTRIC SHOCK. 

Install at least 2m from all metal surfaces.

• RISK OF ELECTRIC SHOCK.

 Never operate any electrical appliance when in your 

spa or when your body is wet. Never place any electric appliance, such as a light, 

telephone, radio, or television, within 2m of spa.

• During pregnancy, soaking in hot water may cause damage to the fetus. Limit use to 

  10 minutes at a time.

• 

TO REDUCE THE RISK OF INJURY:

A. 

The water in a spa should never exceed 40°C (104°F). Water temperature 

between 38°C (100°F) and 40°C (104°F) is considered safe for a healthy adult. 

Lower water temperatures are recommended for young children and when spa 

use exceeds 10 minutes.

B.

 Since excessive water temperatures have a high potential for causing fetal 

damage during the early months of pregnancy, pregnant or possibly pregnant women 

should limit spa water temperature to 38°C (100°F).

C.

 Before entering a spa, the user should measure the water temperature with an 

accurate thermometer since the tolerance of water temperature regulating 

device varies.

D.

 The use of alcohol, drugs, or medication before or during spa use may lead to 

unconsciousness with the possibility of drowning.

E.

 Obese persons and persons with a history of heart disease, low or high blood 

pressure, circulatory system problems, or diabetes should consult a physician 

before using a spa.

F.  

Persons using medication should consult a physician before using a spa since 

some medication may induce drowsiness while other medication may affect heart 

rate, blood pressure, and circulation.

• TO REDUCE THE RISK OF INJURY: 

Never pour water with a temperature higher 

than 40°C (104°F) into the spa pool directly.

• The use of alcohol, drugs, or medication can greatly increase the risk of fatal 

hyperthermia. Hyperthermia occurs when the internal temperature of the body 

reaches a level that is several degrees above the normal body temperature of 37°C 

(98.6°F). The symptoms of hyperthermia include an increase in the internal 

temperature of the body, dizziness, lethargy, drowsiness, and fainting. The effects of 

hyperthermia include failure to perceive heat; failure to recognize the need to exit 

spa or hot tub; unawareness of impending hazard; fetal damage in pregnant 

women; physical inability to exit the spa or hot tub; and unconsciousness resulting 

in the danger of drowning.

• Electric installations should follow national wiring rules, consult a qualified electrician 

with any questions.

CONSULT YOUR PHYSICIAN FOR RECOMMENDATIONS.

3

Содержание S100103





















Отзывы: