20
S-S-003665
Draining the Spa
2.
3.
4.
1.
P6611
A
6.
7.
8.
5.
9.
10.
A
C
P6931/P6613/P6930
NOTE:
Dry the SPA pool
NOTE:
Dry the SPA pump
C
o n
t r
o
ls
a
u
t o
-lo
ck
in
5m
in
. To
u nlo ck/lo ck place
fin
ge
r o
ver
f
o
r
3
se
c.
TEST
C
o
n t
ro
ls
a
u
to
-l o
c k
in
5m
in. T
o un
lock/lock plac
e fin
ge
r o
ve
r
fo
r 3
se
c
.
TEST
NOTE:
DO NOT use hard brushes or abrasive cleaners.
Detergent residues and dissolved solids from bathing suits and chemicals may build up on the spa walls. Use soap
and water to clean the walls and rinse thoroughly.
Spa Repair
For Spa #54112, #54123 and inflatable cover #54113, #54129,
#54148
If the spa is torn or punctured, use the provided heavy-duty repair
patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 seconds before inflation.
Cleaning the spa
For Spa #54113, #54129 (Not including inflatable cover)
If the spa is torn or punctured, use the provided PVC repair patch and glue
(not included) following these steps:
1. Clean and dry area to be repaired.
2. Cut the provided PVC patch to appropriate size.
3. Use glue (not included) to coat the one side of the newly cut patch.
Make sure the glue is evenly distributed.
4. Wait for 30 seconds and then place the cut patch with glue over the
damaged area.
5. Smooth out any bubbles of air that may be trapped underneath, and
press firmly for two minutes.
6. The product is once again ready for use. Repeat this process should
further leaks occur.
7. Wait 30 minutes before inflation.
