TECHNICAL SAFETY INSTRUCTIONS
• Using the pump with an unmatched electrical supply is dangerous and will result in catastrophic
failure of pump.
• Risk of electric shock - When working with electricity, turn the electrical power off at the circuit
breaker and lock breaker door. Failure to do so will result in increased risk of shock, injury and
possibly death.
• Do not remove the grounding prong or modify the plug in any way. Do not use adapter plugs.
Consult a qualified electrician for any questions related to the validity of your plug's grounding.
Handle the pump with care. Do not pull or carry the pump by the power cord. Never pull a plug
from the outlet by yanking the power cord. Keep cord free from abrasions. Sharp objects, oil,
moving parts, and heat should never be exposed to the filter pump.
• Atmospheric conditions may affect the performance and life span of your filter pump.
Unnecessary wear and tear may occur during periods of cold, heat and exposure to sun.
Whenever possible shelter the pump from these conditions.
• Do not add chemicals in the filter pump.
• Assembly and disassembly of this product should only be performed by adults.
GFCI WARNING
• Risk of electric shock. The GFCI must be tested before each use.
• Before inserting plug into a power outlet, make sure the current rate of the power outlet is suitable
for the pump.
• Do not use the pump if this test fails. For assistance, please visit the support section on our website,
www.bestwayusa.com.
• To prevent the risk of electrical shock, ensure your hands are completely dry when plugging-in
the Filter Pump.
• Do not dry run the filter pump. Make sure both the pool’s Inlet and Outlet valves are fully covered
by water before operating the Filter Pump.
6
FOR 330GAL
The filter pump must be vertically fixed on the ground or a base made of
wood or concrete before use. There should be two holes 9mm in diameter
on the base, the space between which should be 127mm. Put filter pump
on the base and attach them together by fastening the bolts and nuts. All
the base parts should weigh at least over 18kg to prevent the pump from
accidentally falling.
390 127
40
390
250
127
2-M8 nut
2-M8 bolt
FOR 530GAL
The filter pump must be vertically fixed on the ground or a base made of
wood or concrete before use. There should be two holes 9mm in diameter
on the base, the space between which should be 159mm. Put filter pump
on the base and attach them together by fastening the bolts and nuts. All
the base parts should weigh at least over 18kg to prevent the pump from
accidentally falling.
390 159
40
390
250
159
2-M8 nut
2-M8 bolt
FOR 1000GAL
The filter pump must be vertically fixed on the ground or a base made of
wood or concrete before use. There should be two holes 9mm in diameter
on the base, the space between which should be 166mm. Put filter pump
on the base and attach them together by fastening the bolts and nuts. All
the base parts should weigh at least over 18kg to prevent the pump from
accidentally falling.
390 166
40
390
250
166
2-M8 nut
2-M8 bolt
ATTACHING A BASE
