Bestway 56377, Руководство пользователя

Страница: 10 / 108

POOL MAINTENANCE
Warning: If you do not adhere to the maintenance guidelines covered herein, your
health might be at risk, especially that of children. Pool water treatment is essential for
the safety of the users. Using chemicals inappropriately will cause property damage
and personal injury.
NOTE:
The pump is used to circulate the water and to filter small particles. In order to
keep your pool water clean and hygienic, you must also add chemicals.
1. It is recommended not to fill the pool with catchment water, drilling water, or
drainage well water: these waters generally contain polluted organic substances
including nitrates and phosphates. Filling pools with water from the public network
is advised.
2. Always keep your pool clean and apply the correct pool chemicals. Unsanitary
water is a serious health hazard. It is recommended to use disinfectant, flocculant,
acid or alkali chemicals to treat your pool.
3. Clean the PVC liner regularly with non-abrasive brushes or a pool vacuum cleaner.
4. Throughout the season, the water filtration system must run long enough each day
to clean the entire volume of water in the pool.
5. Check the filter cartridge (or sand in a sand filter) regularly and replace dirty
cartridges (or sand).
6. Regularly check the screws, bolts and all the metal parts for rust. Replace if necessary.
7. If it rains, check that the water level is not higher than the specified level.
If water exceeds the specified levels, drain the pool to the specified level.
8. Do not use the pump when the pool is in use.
9. Cover the pool when not in use.
10. For pool water treatment, the pH value is very important.
ATTENTION: Do not leave the drained pool outside.
ATTENTION: Please do not clean or perform any maintenance work on the PVC
liner when the temperature is lower than 5°C (41°F).
The following parameters ensure good quality water
WINTERIZATION
If you do not want to dismantle the pool in winter, please observe the following
instructions:
IMPORTANT: Do not drain all of the pool water. If you do so, the pool may be
damaged by strong wind. Drain the water to 10cm below the inlet valve on the pool
wall.
1. Drain the water to 10cm below the inlet valve on the pool wall. You can use a
pump or a garden hose (Diagrams 19, 20).
2. Treat the pool water with a suitable chemical product.
3. Remove the filtration system from the pool.
You can leave the inlets/outlets attached to the pool.
4. Also remove any other pool accessories and store them in a dry and cool place.
5. Protect the pool with the pool cover.
If you want to dismantle the pool in winter, please observe the following instructions:
1. Drain the pool with a garden hose, or use a drain pump to empty the pool
(Diagram 19).
2. Clean all pool parts with a sponge and soap with a neutral pH. Dry them and tidy
them away in a dry and clean place.
10
Please choose the type of your pool:
REQUIRED INFORMATION - PLEASE WRITE THE SHIPPING ADDRESS
Please write the Batch Number and Item Code located near the drain valve
Name: Address:
Zip Code: Retailer:
Country: City:
Mobile: Telephone:
E-mail:
Item Code: Batch Number:
TO: Bestway
®
Service Department Date:
Date of purchase: Customer Code Number:
Limited BESTWAY
®
Manufacturer’s Warranty
The product you have purchased comes with a limited warranty. Bestway
®
stands behind our quality guarantee and assures, through a replacement warranty, your product will
be free from manufacturer’s defects.
The following provision is only valid within the European member state countries. The legal regulation of Directive 1999/44/EC will not be effected by this BESTWAY limited
warranty.
To enact a warranty claim, this form must be completed and submitted with a copy of your receipt/purchase to your local Bestway After Sales Center. Before any claims can be
accepted, the Bestway After Sales Center may ask you to send a piece of the defective part to the center (e.g. a cut out of the production batch number / drain valve). Please
contact your local Bestway After Sales Center before sending any documents. They will provide full instructions of what is needed for your claim.
Bestway
®
is not responsible for economic loss due to water or chemical costs. Bestway
®
will not replace any products deemed to have been damaged due to negligence or
having been used outside of the owner’s manual guidelines.
Bestway’s warranty covers manufacturing defects discovered while unpacking the product or during use, within the limits of use and respectful of warnings and instructions
given within the user’s manual. This warranty applies only to products which have not been modified by any 3rd parties. The product must be stored and handled in accordance
with the technical recommendations.
The Limited Warranty is valid for the period indicated above. The warranty start date is the date of sale shown on the original receipt/purchase invoice.
FAX/E-MAIL/TEL: Please refer to your country according to the information found on the back cover or on our website: www.bestwaycorp.com.
Please provide your address details in full. Note: Incomplete address details will result in delayed shipments.
Bestway reserves the right to charge for redelivery of undelivered packages where the recipient is at fault.
Fax:
Batch Number
Item Code
Problem description
Item is torn / Leaking
Missing part (Please use the code for the missing part. This can be found in the owner's manual.)
Other (Please describe)
Faulty welding Faulty upper ring Faulty drain valve
Bestway reserves the right to request photographic evidence of defective parts, or to require sending the item for additional testing. In order to best assist you, we
request all information you provide to be complete.
FOR FAQ, MANUALS, VIDEOS OR SPARE PARTS, PLEASE VISIT OUR WEBSITE: www.bestwaycorp.com
VIDEOS ARE ALSO AVAILABLE ON OUR BESTWAY CHANNEL ON YOU TUBE: www.youtube.com/user/BestwayService
IMPORTANT:
ONLY THE DAMAGED PART WILL BE REPLACED, NOT THE COMPLETE SET.
#BXXXXX
BWXXXXXXXXX
YYYY-MM-DD
S-S-004186