instruction manual
25
English
5. Switch on the fan by turning the speed dial.
a. Position ‘I’: the fan operates at low speed.
b. Position ‘II’: the fan operates at normal speed.
c. Position ‘III’: the fan operates at high speed.
6. Stop the fan by turning the speed dial to position ‘0’.
cleAning And MAintenAnce
Figure
8
Dismantling
the
fan
for
cleaning and maintenance
Over the course of time dust can accumulate between the spokes in the fan housing, and on the fan
blades. Always begin by trying to remove the dust with a brush and/or vacuum cleaner. If this does not
remove all the dust you can always dismantle the fan and clean it.
1. Remove the plug from the wall socket.
2. Use a small crosshead screwdriver to loosen the screw at the bottom of the fan housing; hold the bolt
at the rear of the fan housing to prevent it from turning.
3. Remove the front half of the fan housing.
4. Hold the fan blades to prevent them from turning, and use a small crosshead screwdriver to loosen the
locking screw. Remove the fan blades from the shaft.
5. Use a crosshead screwdriver to loosen the screws from the motor housing and then remove the
housing.
6. Clean the dismantled parts and the base with a damp cloth. Dry thoroughly with a dry cloth.
7. Clean the motor housing with a dry cloth.
• Verify that the appliance is not connected to the power supply before you clean it.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
• Be careful not to cut yourself on the sharp edges of the fan blades.
tecHnicAl detAils
Type:
DFS45S
Power consumption:
50 W
Mains Voltage:
220-240 V ~50 Hz
guArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty
appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
