Bestron AOV45, Инструкция по эксплуатации

Страница: 28 / 44

instruction manual
28
English
drive sleeve (10). Place the straight end of the roasting
spit on the support.
Make sure the meat or poultry does not touch the top
heating element when turning.
7. Leave the oven door slightly open so as to allow the air to circulate.
8. Use the temperature setting to set the required Temperature.
9. Rotate the function setting to the setting . When using the roasting spit we advise you to use only the
top heat, because the bottom heat elements are covered by the baking tray which catches grease and
therefore it has no effect.
10. Use the timer setting to set the roasting time. The amount of time required depends on the type and
quantity of food.The On/Off indicator will be lit.
11. Roast the meat or poultry until it is cooked. The oven will turn itself off automatically and a sound signal
will be heard once the roasting time has elapsed. The On/Off indicator light will go out.
If the meat or poultry is ready but the roasting time has not yet elapsed, you can turn off the oven by
rotating the function setting to . The timer will continue, but the oven will no longer be heated.
12. Wear oven gloves.
13. Open the oven door. Take care! The door is hot.
14. Use the removal tool to remove the roasting
spit with the meat or poultry and place
it on a plate.
15. Close the oven door.
16. Remove the clamp from the round end
of the roasting spit and remove the meat
or poultry from the roasting spit.
Take care! The roasting spit and the
meat or poultry are hot.
17. Use the removal tool to remove the baking tray from the oven.
Take care! Any juice and fat on the baking tray will be hot!
18. Once you have finished, rotate the function setting to
and remove the plug from the plug socket.
cleAninG And mAintenAnce
Clean the appliance every time after use.
1. Remove the plug from the wall socket and allow the appliance to cool down completely.
2. Use warm water with a small amount of washing-up liquid to clean the baking tray, the grille, the
roasting spit and the removal tool. Rinse the items with plenty of water and dry them thoroughly.
3. Use a damp cloth to clean the interior and exterior of the oven and the door. Dry them thoroughly.
4. Place all the items back in the oven and store the oven
• Make sure the plug has been removed from the plug socket before cleaning the appliance.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
• Never immerse the appliance, the power cord or the plug in water or any other fluid.
the enVironment
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user’s instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
Figure 5
Removing the roasting spit