P15 - 54922 Rev. D 0618
Installation Instructions - TREKTOP NX GLIDE 2-Door
© 2018 Bestop, Inc.
Install Bow Mount Brackets
1
2
Step 1
Header/Fabric/Side Bow Assembly
Step 1
Secure Header/Fabric/#2 Bow/Side Bow Assembly to Door Rails
Section 8
Right Side
Right Side Detail
Align the Header/Fabric/Bow Assembly so
that the locking flange with brass bushing is
positioned above the spring-loaded locking
lever assembly in the top of the door rail.
While pushing in the latch release lever on the
underside of the door rail, slide the Header/
Fabric/Bow Assembly down so that the
locking flange aligns with the spring-loaded
locking pin.
Release the latch lever so that the locking pin
engages the brass bushing.
Repeat on the left side.
Page 15
