P13 - 54922 Rev. D 0618
Installation Instructions - TREKTOP NX GLIDE 2-Door
© 2018 Bestop, Inc.
Install Bow Mount Brackets
Step 2
Side Bow Assembly
Step 1
Fabric/Header/Side Bow Assembly
Section 6
Place Fabric/Header/Side Bow Assembly onto Jeep
1
2
Right Side
Right Side
Step 1
Step 2
Lift Fabric/Header/Side Bow Assembly onto
top of Jeep, with the Header sitting on top of
the Jeep windshield, and the fabric draped
forward over the Jeep hood.
You may want to protect the finish of the Jeep
by putting a blanket across the Jeep hood.
Extend the Side Bows out straight and lay the
Side Bows on top of the Door Rails.
Release the spring-loaded catch at the end of
the bow leg by pulling out on the knob.
Slide the slotted end of the catch over the leg
of the Bow Mount Bracket, and release the
catch so that it snaps into place in the hole.
Repeat on the left side.
Page 13
