P18 - 54922 Rev. D 0618
Installation Instructions - TREKTOP NX GLIDE 2-Door
© 2018 Bestop, Inc.
Install Bow Mount Brackets
Step 1
Section 11
Drape Top Fabric Over Jeep & Open Sunrider; Attach Stay Strap to Rear Bow
Step 2
Step 1
Step 2
Pan Head
Washer Screw
Qty. 2 per side
Part # 393.79
Hardware
Locate the loose end of the right side Stay
Strap. Wrap the Stay Strap over the top of the
right side of the Rear Bow, and attach it to the
Rear Bow Assembly with two (2) #8x1/2” Pan
Head Washer Screws #393.79 per side, using
the outer two pre-drilled holes in the Rear Bow
Assembly.
Attach the Stay Strap to the Rear Bow “Flag”
using one (1) M3 Machine Screw #545.15, one
(1) M3 Flat Washer #545.13 and one (1) M3
Nylon Lock Nut #545.14. Use the hole closest
to the tube.
Repeat for left side Stay Strap.
393.79 545.13 545.14
545.15
Lift up the fabric and drape it back over
the top of the Jeep, pulling it over the
top of the Rear Bow Assembly and Stay
Strap connecting to the #2 Bow.
Open the Sunrider. Fold the Sunrider
back from the front pivot point, resting
the front portion of the top on the rear
portion.
When folding the Sunrider back, be sure
to push the fabric in at location
1
as
shown above, so that with the Sunrider
folded all the way back, the fabric ends
up with a double-fold, as shown.
M3 Machine
Screw
Part #545.15
Qty. 4
M3 Flat
Washer
Part #545.13
Qty. 4
M3 Nylon
Lock Nut
Part #545.14
Qty. 4
1
Folded Top
Fabric will have
a Double-Fold
Page 18
