90005 4
Rev. B 1298
Step Three
Install the Tailgate Belt Rail flush with the top of the bevel on the
tailgate. Use the Belt Rail as a template to mark, center punch and
drill a 1/8" hole on each end of the Belt Rail. Install the Belt Rail with
two #8 x 1/2" Pan Head Washer Screws. Then drill two 7/32" holes in
the middle of the Belt Rail and secure it with the #10-24 Truss Head
Machine Screws and the #10-24 Locknuts.
Tailgate
Inside of Vehicle
#8 x 1/2" Phillips
Head Screw
Tailgate Retainer Detail
Cross Section
Body Panel
Tailgate
Retainer
Caution: When drilling in the top edge of the
vehicle body, check underneath for wiring.
Pull the wiring out of the way before drilling.
#8 x 1/2" Pan Head
Washer Screws
#10-24 Truss Head
Machine Screw
Tailgate Retainer
