background image

90005  8

Rev. B  1298

Care and Maintenance of your Bestop Top

Your top is made of the finest materials available.  To keep it looking new and for the
maximum possible wear, it will need periodic cleaning and maintenance.

Washing:

 

The top fabric should be washed often using soap, warm water and a soft

bristle brush.  Rinse with clear water to remove all traces of soap.

Windows: 

 

Keep windows clean to avoid scratching.  DO NOT use a brush on the

windows!  Wash with a watersoaked cloth or sponge and a mild dishwashing deter-
gent.  NEVER WIPE THE WINDOWS WHEN THEY ARE DRY.  Be careful when cleaning
snow or frost from the vinyl windows since they are easily scratched and may crack at
low temperatures.  DO NOT roll the sides or rear window in cold weather.  The windows
become stiff and will crack.

Zippers: 

 

Keeping the zipper cleaned and lubricated with a silicone lubricant will help

prevent damage and keep the zippers in a smooth
working condition.  If a zipper opens behind
the slider, the slider may
have been spread apart.
This problem can usually be
repaired by using an
ordinary pair of pliers to
bring the sides back into
parallel.  Return slider to the end of
the zipper in the normal Open position.
Squeeze lightly at first and test the zipper.
If the zipper continues to remain open
squeeze more firmly with the pliers and
try the zipper again.  Repeat this
procedure until the zipper operates
correctly.

Water: 

 

Seeping through at the seams may be stopped by applying 3-M Scotchgard®

on the inside of the seams.  Rips in the fabric may be repaired with Bondex® iron on
patches.  Iron the patches to the Inside of the top, carefully following the Bondex®
instructions.

Snaps: 

 

Keep snaps cleaned and lubricated with silicone to help prevent snaps from

sticking to the studs.  If a snap does become stuck to a stud, use a screwdriver and
GENTLY pry apart to prevent permanent damage to the snap or the top fabric.

Normal Slider -
Jaws Parallel

Damaged Slider -
Jaws Spread Apart
(sometimes broken)

LIMITED WARRANTY

We warrant our product to be free from defects in material and workmanship, for
the terms specified below, provided there has been normal use and proper
maintenance. This warranty applies to the original purchaser only. All remedies
under this warranty are limited to the repair or replacement of any item or items
found by the factory to be defective within the time period specified.

If you have a warranty claim, first you must call our factory at the number below
for instructions. You must retain proof of purchase and submit a copy with any
items returned for warranty work. Upon completion of warranty work, if any, we
will return the repaired or replaced item or items to you freight prepaid.  Damage
to our products caused by accidents, fire, vandalism, negligence, misinstallation,
misuse, Acts of God, or by defective parts not manufactured by us, is not covered
under this warranty.

THE WARRANTY TIME PERIOD IS AS FOLLOWS: ALL “SOFT GOODS” MANUFACTURED
BY OUR COMPANY (USING PRIMARILY VINYLS, PLASTICS, AND/OR FOAM): ONE
YEAR FROM DATE OF PURCHASE.

ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICU-
LAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION
AND SCOPE AS THE EXPRESS WRITTEN WARRANTY.  OUR COMPANY SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.

Some states do not allow limitations on how long an implied warranty lasts, or the
exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.

For further information or request for warranty work, please contact:

Bestop Inc.
Customer Service
(800)346-3910
(303)465-1755

Содержание 90005









Отзывы: