Installation Instructions - Trektop NX
Page 26
Set Header Assembly Latches & Install Rear Window
Section 17
Step 1
Step 1
Step 2
Step 2
© 2016 Bestop, Inc.
P26 - 56823 Rev. K 0116
Leave latch open
Set hook on loop
Hook the latches on the Header into the
loops on the windshield frame.
Do not close the latches at this time - they
must remain open.
Repeat on both sides of the vehicle.
Align the J-Slide along the top edge of the
Rear Window with the J-Slide sewn into
the rear of the top.
Pull down snugly on the rear window until
it snaps into J-slide.
Slide them together until the rear window
is centered in the opening.
Leave rear window hanging for now.
