Installation Instructions - Trektop NX
Step 1
Open the Sunrider by lifting the Header Assembly
away from the windshield and pivoting it toward the
rear of the vehicle.
© 2016 Bestop, Inc.
P23 - 56823 Rev. K 0116
Step 2
Run the cable under the Door Surround screw and
through the Cable Bracket. For the initial installation,
hook the spring at the end of the cable to the outer
hole in the Cable Bracket.
In later installations, or for a tighter fit, increase spring
tension by hooking the spring into one of the inner
holes in the Cable Bracket.
Repeat on both sides of the vehicle.
Page 23
Open Sunrider & Secure Cable Springs
Section 14
Step 1
Step 2
Use outer hole for
the initial installation
