Installation Instructions - Trektop NX
Page 17
CRITICAL STEP - Attach Side Bows to Header/Fabric Assembly (cont.)
Section 9
Step 3
393.79
Hardware
#8 x 1/2” screw
Qty - 4 per side
Part # 393.79
Step 3
Step 4
Once the holes are aligned, use two (2) #8 x 1/2”
screws to mount the Side Bow to the lower side
of the Header Assembly.
Repeat on both sides of the vehicle.
1 Flip the Header Assembly over.
2 Be sure the fabric lays flat after you
flip the header assembly over to expose
the upper screw holes.
3 Insert two (2) #8 x1/2” screws on the
upper side of the header assembly.
Repeat on both sides of the vehicle.
© 2016 Bestop, Inc.
P17 - 56823 Rev. K 0116
Flip the Header
Assembly over
Lay the fabric flat and make
sure the fabric remains fully
inserted into header assembly
2
3
1
- Critical Step -
Use 4 screws per side
2 screws on lower side
2 screws on upper side
