Best Wi-Q Technology EXQ Series, Руководство по установке

Страница: 2 / 20

Installation Instructions for Wi-Q Technology™ EXQ Exit Hardware Trim
2
BEST
a Product Group of dormakaba USA Inc.
❑ Battery bracket
❑ Door position
switch with
magnet
❑ Battery cover with
antenna
❑ Battery pack
❑ Battery cover screw
package
❑
Bar code ID sticker
(for your records)
❑ Cable ties, butt-
splices, and tape
❑
Installation
templates and
instructions
BEST ACCESS SYSTEMS
a
a Product Group of dormakaba USA Inc. 1
Introduction
These installation instructions describe how to install
your
BEST® Wi-Q Technology™ EXQ Series Exit Hardware T
rim. Electronic Stand-Alone Exit Hardware Trim is availabl
e for use with the following types of wide stile exit devi
ces manufactured by Stanley-Precision Hardware (2000
Series) and Von Duprin® (98/99 Series):
Not all features are available for all exit device config
ura- tions. The table below details what sensors are a
vailable for which exit device configuration
s:
n
Contents
These instructions cover the following topics:
Planning the installation
................................................1
Preparing the door ..........................................................4
Installing the exit hardware and trim
............................8 Completing the installation
..........................................15
Device
DS a
a. Door position sensing
TS b
b. Request-to-exit (PHI touchbar monitoring)
LS c
c. Latch sensing
P r ecisio n
Rim (2100)
Surface Vertical (2200)
Mortise (2300)
Wood Door Concealed (2700)
Concealed Vertical (2800)
Vo n D u p r i n
Rim
Surface Vertical
Concealed Vertical
Site survey
Use the following survey to record information abou
t the
installation site and hardware applica
tion.
Exit hardware type:
Door handing and bevel:
Left-hand reverse bevel (LHRB)
Right-hand reverse bevel (RHRB)
Door type:
Door thickness: inches (1-3/4
″ to 2-1/4 ″ ) Components checklist
Use the following checklist to make sure that you have the
items necessary to install your EXQ Exit Hardwar
e Trim.
rim
surface vertical rod
mortise concealed vertical rod
Wood
Metal
Escutcheon and
lever assembly
Battery bracket
Installation Instructions for
Wi-Q Technology™ EXQ
Exit Hardware Trim
Tools required
Use the following checklist to make sure that you have the
tools necessary to install your EXQ Exit Hardware Trim.
For Precision® Hardware and Sargent installations
❑ 1-3/8” dia hole saw (EV function only)
❑ 1-1/8” dia hole saw
For Von Duprin® installations
❑ 2” dia hole saw
❑ 3/4” dia hole saw
For BEST® cylinders
❑ BEST ED211 cylinder wrench
For surface vertical exit devices
❑ Razor blade
❑ 7-pin core (only
included if ordered
with trim)
❑ Cylinder mounting
sleeve (for Von
Duprin functions
only)
❑ Temporary
operator card
❑ Key cylinder and
keys (only included
if ordered with
trim).
❑ Electric drill (preferably corded) ❑ Straight edge
❑ Jigsaw ❑ Square
❑ Wire snips ❑ Pencil/marker
❑ Wire strippers ❑ 7/16” dia drill bit
❑ Phillips screwdriver ❑ 7/8” dia drill bit
❑ Measuring tape ❑ 1” dia hole saw
BE
ST
Temporary
Operator
Rim cylinder Mortise cylinder
OR