7
6. CHOOSE THE OPENING (P5
AND
P8
BLOWERS
ONLY
)
Removing horizontal knockout opening on back of hood.
CAUTION
If using P5 blower, remove 10
”
wide knockout. If using P8 blower, remove either 10
”
or 14
”
wide knockout.
Remove the knockout for the chosen opening (horizontal at the back of the hood or vertical on rough-in plate). See pictures below.
14
”
KNOCKOUT
10
”
KNOCKOUT
HD0076
14
”
KNOCK
OUT
HD0077
10
”
KNOCK
OUT
Removing vertical knockout opening on rough-in plate.
5. REMOVE FILTERS AND BOTTOM PANEL (A
LL
BLOWERS
)
Lay the hood flat on a table. Use a piece of cardboard to avoid
damaging the table or the hood.
Remove tape on filters. Remove filters from hood and set aside.
NOTE: It is recommended to start with the center one(s).
HD0542
HD0541
R
ETAINING
SCREWS
B
OTTOM
PANEL
Remove bottom panel both retaining screws. Set bottom panel and screws aside.
HD0544
1
3
2
