EN
SYMBOLS
3
Maximum noise and vibration levels [1]
Measured sound pressure level at ear’s operator
- Measurement uncertainty
dB(A)
dB(A)
89
3
Measured sound power level
– Measurement uncertainty
dB(A)
dB(A)
105
5
Garanteed sound power level
dB(A
110
Vibrations level
– Front handle
– Rear handle
– Measurement uncertainty
m/sec
2
m/sec
2
m/sec
2
5.8
12.1
1.5
TECHNICAL SPECIFICATIONS
CJ 300
CJ 300 C
Engin
e (2-stroke single cylinder) – displacement
cm
3
25.4
25.4
Fuel (petrol/oil)
%
40 = 2.5 %
40 = 2.5 %
Power
kW
0.9
0.9
Chain gauge
mm
0.050” / 1.27 mm
0.050” / 1.27 mm
Idle RPM
1
/min
< 3000 - 3500
< 3000 - 3500
Maximum admissible rpm without load with chain installed
1
/min
11000
11000
Fuel tank capacity
cm
3
200
200
Maximum power specific consumption
g/kWh
560
560
Oil tank capacity
cm
3
140
140
Chain pinion teeth / pitch
6T / 3/8
8T / 1/4
Cutting length
mm
220 / 270
235
Weight (with empty tank)
kg
3.2
3.2
Maximum chain speed
m/s
21
18.6
Bar (Qirui)
12”
PO12-50SR
Chain (Oregon)
12”
91VG045X
Bar (Qirui)
12”
PO12-50SR
Chain (Oregon)
12”
91P045X
Bar (Oregon)
12”
120SDEA041
Chain (Oregon)
12”
91P045X
Bar (Oregon)
10”
100SDEA041
Chain (Oregon)
10”
91P040X
Bar (Oregon)
10”
100SDEA041
Chain (Oregon)
10”
91PJ040X
Bar carving (Qirui)
10”
AT10-50 QR
Chain (Longer)
10”
E1-25AP060T
[1]
WARNING! The vibration value may vary according to the usage of the machine and its fitted equipment, and be higher than
the one indicated. Safety measures must be established to protect the user and must be based on the load estimate generated
by the vibrations in real usage conditions. In this regard, all the operational cycle phases must be taken into consideration,
such as switching off or idle running.
2. SYMBOLS
1)
Warning! Read, understand and follow all
warnings.
2)
Warning! Danger of kickback.
3)
Use the chain saw with two hands.
4)
Read operator’s instruction book before oper
-
ating this machine.
5)
Wear head, eye and ear protection. If you are
using the machine every day in normal con-
ditions, you can be exposed to a noise level of
85 dB (A) or higher.
6)
Wear strong working gloves.
7)
Wear boots or protective shoes with grippy
soles and steel toecaps.
8)
Use appropriate protections for foot-leg and
hand-arm.
9)
This saw is for trained tree service operators
only (see Operator’s Manual).
