1.
Square wall frame. Install a 36" long 2x6 board on the right end of the wall frame. The
plate needs to extend 3-1/2" past the end of the wall frame. Use 10d sinkers.
2.
Install a 48" and 72" long 2x6 boards in the center of the wall frame. The last tie plate will
be installed later.
3.
Square wall frame. Install the first full width siding panel with the 'LAP' edge extending
3-1/2" past the wall frame. Work from right to left. The siding will extend 3/4" below the
bottom plate Use 8d galv nails, spaced 12" apart.
Step 7
Install Siding on Right Sidewall
A
B
Siding Extends
3-1/2" Past Stud
72" Long Tie Plate
36" Long Tie Plate
A
B
LAP
Edge
Siding Extends 3/4" Below Plate
4.
Install the three (3) more full width siding panels. Cut the last
panel to extend 3-1/2" beyond the wall frame.
2x6 Extends 3-1/2"
Past 2x4 Stud
Insure frame is
positioned as shown
48" Long Tie Plate
