Step 5
Set Wall Panels
1.
Erect back wall and side walls. Secure walls together at the corners. Use (4) four 10d sinkers
per corner. Brace side walls with 2x4s removed from pallet to hold walls secure and plumb.
2.
Starting at back corner install a OSB panel flush with the back wall 2x4 frame and flush with
top plate. Nail OSB to back wall and all 2x4s using 6d common nails spaced 8" apart
3.
Install (3) three more OSB panels. Last panel will extend 3-1/2" past wall to receive front wall
panel.
4.
Start at back wall and apply OSB to opposite wall.
5.
Erect front wall panel and secure corners with 10d sinkers. Nail OSB to front wall.
6.
Cut and remove bottom 2x4 from door opening.
7.
Nail walls to floor through bottom plate. Space 16d galv. nails 24" apart.
185" Long Wall
Cut 2x4 Plate
from Opening