Step 4B Assemble Back Walls for 20' Building Length
1.
Select the 10' wall frame, without siding, assembled in Step 4A. Position this wall frame,
against the wall panel so the 72" wall plates are against the sided panel as shown below.
DO NOT nail these frames together so they can be separated later.
"Panel 1"
72" Wall Plate
2.
Square the wall frame. Install a full width siding panel but do not nail along the long edge
that overlaps the 10' wall frame. You can nail this edge after the wall panels are installed.
This will enable you to separate the wall panels making them easier to handle.
Do Not Nail Along This Edge
LAP Edge
48" Wall Plate
3.
Install another full width siding panel and finish
with a 24" wide siding panel with a 'LAP'Edge.
Cut edge should be flush with frame.
'LAP' Edge
