Besantek BST-MGR01, Инструкция по эксплуатации

Страница: 21 / 23

- - - - - - -
BESANTEK
- - - - - -
14. Charging The Battery
This instrument has an internal rechargeable battery.
Only use the supplied battery charger to charge it.
To avoid safety issues, do not connect to a device to test or use
while re-charging the battery.
However, the internal circuitry will disconnect the measuring and
testing circuitry while charging, it is recommended to make sure that
no test leads are connected while charging the internal battery.
Do not try to by pass that circuit, or warranty will be void.
The battery has a maximum life of about one or 2 years, depending
of its maintenance.
Only replace with the same type of battery.
&REMEMBER TO CHARGE THE BATTERY!
ALWAYS recharge the battery when the Low Battery info appears
on the LCD. Leaving the battery uncharged for a long period of
time may affect the lifespan of the battery.
Charing interral: Every 3 months
15. Fuse Replacement
REPLACING THE POTENTIAL FUSE
The P
F
fuse mean it's the Potential Fuse.
The Potential Measurement Circuit of this instrument is fuse
protected.
Only replace with the same type as the original fuse.
The Potential Fuse is S00mA Slow Blow type.
EPLACING THE CURRENT FUSE
The C
F
fuse mean it's the Current Fuse.
The Current Injection Circuit of this instrument is fuse protected.
Only replace with the same type as the original fuse.
The Current Fuse is 2A Slow Blow type.
-19-