DKAC-I / MBAC-I
- Climate gateway
Programming manual
v1.0
www.besknx.com
9
Description
By means of this communication object, the operating mode of the climate machine is chosen between
the cooling and heating modes. This communication object will only be available in the case that two
unique modes are chosen in the corresponding parameter.
Object
Object 104: Mode – Mode status: 0=Cool; 1=Heat
Function
1 bit communication object to notify the machine mode between cooling and heating.
Description
By means of this communication object, the operating mode of the climate machine is red and notified
between the cooling and heating modes. This communication object will only be available in the case
that two unique modes are chosen in the corresponding parameter.
Object
Object 105: Fan - Fan: 0-33%=Min; 34-67%=Med; >68%=High
Function
1 byte communication object to set the speed of the machine.
Description
By means of this communication object it is possible to set the fan speed of the machine. This
communication object will only be available if three levels of ventilation are selected using the
corresponding parameter.
Object
Object 106: Fan – Fan status: 0-33%=Min; 34-67%=Med; >68%=High
Function
1 byte communication object to read or notified the speed of the machine.
Description
By means of this communication object it is possible to read or notify the ventilation speed of the
machine. This communication object will only be available if three levels of ventilation are selected
using the corresponding parameter.
3.4
Parameters
3.4.1
General
Parameter
Type of control
Value
Slave / Master
